Buy and Sell Boats and Yachts
Home
Network Yacht Brokers Boats and Yachts

Endurance 44 Yacht For Sale - Full Specification


Back to Details
Endurance 44 Yacht For Sale
 
Network ID 10576Power/SailSailboat
Year1985Price
£49,500
Hull MaterialC-FlexEngines1
FuelDieselEngine MakePerkins
Constructionc-FlexLocated In Plymouth
Other
 
Dimensions      
LOA 44' 0" (13.42m)KeelLong
Draft 6' 0" (1.83m)Displacement
Beam13' 6" (4.12m)Ballast
LWL Berths8
 
Endurance 44 Yacht For Sale Accommodation
Construction:
Accommodation:
Double berth in forecabin, two single bunks in mid-cabin, owners double cabin and 2 pilot berths in saloon. Heads compartment to port with shower. Galley with 2 burner gas cooker,grill and oven. Stainless steel sink.
Navigational Aids:
Plastimo binnacle compass (2000) VHF radio  Autohelm 2000 autopilot with wind vane, Garmin GPS 50 with cockpit repeater  Stowe log, echo sounder and wind speed direction, Apelco radar with scanner mounted on stainless steel pole at the stern
Engines and Tankage:
Perkins 4.203 diesel developing 60hp and driving a 3 bladed propeller. 3 x 12v batteries (105/105/110 amp hr) charged by engine driven alternator. Hot and cold pressurised water. 50 gallons diesel and 100 gallons fresh water
Sails and Spars:
: Alloy mast and boom with stainless steel standing rigging. Cutter rigged. Mainsail new 1999. Furling genoa (1994) on Rotostay furling also 94. Staysail
Equipment:
Wire jackstays, Firdell radar reflector, navigation lights, 2 bilge pumps, 45lb CQR anchor and chain with manual windlass, various fire extinguishers, fire blanket, Danbuoy, horseshoe lifebuoy, Avon inflatable dinghy, radio cassette
Remarks:
Hull constructed of C-Flex. C-Flex is widely used in fibreglass construction methods in North America. It is a fibreglass sheeting material that is made up of fibreglass rods alternating with bundles of unsaturated roving. C-Flex is immensely strong because it is a unidirectional reinforced fabric and is considerably stronger lengthwise than normal fibreglass matt. The molded hull shape is then completely saturated with resin and a fibreglass laminate is overlaid to the required thickness.The hull is then faired with epoxy filler. The owner has drilled through the topsides to put in scuppers and reports that in these areas the hull is ½ -3/4 inch thick. Epoxy coated plywood decks with GRP doghouse and wooden cockpit with teak laid sole and seats. These Peter Ibold designs have been world cruised with considerable success. All new deck hatches 2003.
Endurance 44 Yacht For Sale
 
Endurance 44 Yacht For Sale
 
Extra Pictures for Endurance 44 Yacht For Sale
 
ChartSaloon accessSaloon
ChartSaloon accessSaloon
Saloon fwdDble cabinGalley
Saloon fwdDble cabinGalley
Saloon fwdDble cabinGalley
Saloon fwdDble cabinGalley
View 11 more pictures of this boat
 
Contact: Network Yacht Brokers (Plymouth), Mayflower International Marina, Ocean Quay, Plymouth
Tel: +44 [0]1752 605377 Fax: +44 [0]1752 605377 Email: nyb.plymouth@btconnect.com
 
Disclaimer : The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel/equipment. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Options for this Boat
Back to Details
Email for more information
Print boat information on this page
Add boat to Favourites
 
Boat Finder
Select a boat :
Length :  
 
or Keyword :
 
Boats Per Page :  
Search
 
Quick Search:
 
Power Boats length < 24'
Power Boats length 25' - 30'
Power Boats length 31' - 35'
Power Boats length 36' - 40'
Power Boats length 40+
 
Sail Boats length < 24'
Sail Boats length 25' - 30'
Sail Boats length 31' - 35'
Sail Boats length 36' - 40'
Sail Boats length 40+
 
Home | Boats for Sale | Contact | Offices | © 2004-7 Network Yacht Brokers | livetech | Sitemap